SPECIAL THANKS. I would like to thank Paul Watson for his sponsorship of several lead figure collections on this blog. Having decided to clear his spare/surplus figures, he generously forwarded them on with no other requirement than they deserved to be restored. I would also like to mention George S. Mills, who kindly furnished a quantity of plastic figures which greatly enhanced several collections.

Saturday, 25 January 2025

Matchstick Firing Cannon (and More)

                                                   πŸ‡¦πŸ‡Ί  HAPPY AUSTRALIA DAY (26th)  πŸ‡¦πŸ‡Ί

           ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★

MATCHSTICK FIRING CANNON

Regular visitors will be aware I'm hoping to stage a gunboat wargame as part of my fictitious war between the United States and the British Empire in c.1900. This game will be using matchstick firing cannon to indicate hits, and dice to determine the damage that has been done.

During the last century W. Britains began to manufacture matchstick firing die-cast guns. Arguably, the most common still found today is the 25pdr Gun Howitzer, which started production in the 1950s. I believe the code WB2026 was the original model, possibly painted in khaki green, later models were coded No.9705, with dark green paintwork. 

Not only are these 25pdr Gun Howitzers often seen in auctions and second-hand shops, but their firing mechanisms usually still work perfectly. What a credential to the quality of W. Britains Toys!

With several of these guns in my collection, it was vital some kind of assessment was made as to their game potential. Firstly, I needed to confirm that both guns were equal in their firing. Secondly, should I construct special ammunition? Thirdly, what was their range?


Without going 'overboard' (sorry), I decided to hold some performance tests. Here are the main points.

1. Pleased to report that my two 25pdr guns are equal in their firing.

2. A target vessel was placed twelve foot away, showing its side. It measured ten inches in length, and six inches high. 

3. Three types of ammunition were tested. The first comprised straight and strong matchsticks. The second had the matchstick heads covered in a white paper label, for additional weight. The third were shorter, made of bamboo, given a point, and painted red. The gun was to be fired at ground level.

4. The matchsticks averaged one hit out of every six. The other five fell short or drifted to the left. I noticed no major distinction in the labelled matchsticks, although slightly easier to find.

5. The pointed bamboo ammunition scored two hits out of every six. And those that missed travelled another three foot. (And you could barely see them fly!) I should also mention, this ammunition has the ability to permanently blind your opponent, I guess it all depends on how important it is that you win.

Conclusion. Well, I'm not quite sure there is one. The bamboo does offer slightly more skill in the firing. While the irregularity of the matchstick could prove both amusing and irritating. I welcome opinions. 

           ⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓

RESTORING DRAUGHT HORSES 

While pleased to have abstained from auctions for four months, my collection still included a fair number of horse drawn vehicles that lacked horses to pull them. Something had to be done. 

When I spotted these, TO BUY NOW or OFFER, I took up the challenge. We agreed on £20 for the nine horses, which included delivery. OK, it's not quite a bargain, many also required paint stripping, and some needed repair work.....but their arrival has reduced a problem. 


Two of those below are smaller, but fine for my Ruritanian 50mm collection.
Repairing with metal rods and milliput.
The horses are W. Britains, Simon & Rovollet, and a couple of home cast or Benbros? There is also one horse with the words F.M.Co. ENGLAND, which is totally new to me. Joining these with others in my collection, I'm going to stick to my policy of basing a pair of horses with a metal wire loop between them. I can then link a team to any vehicle with a central shaft. Seven of the nine were paint stripped, two were good enough to just add some painted detail.
Here are the horses (Jan.22) repaired, painted and varnished. 

🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠🎠

OLD CARDBOARD GUNBOAT

I couldn't resist uploading a photo of this apparently American-made antique toy. It really is quite amazing how it has lasted! Now I must admit, I'm slightly tempted to reproduce it for the wargames table, using authentic materials (lol). But I don't see it being quite suitable for use in my damp English garden. 

⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓

VISITING THE COLLECTABLES SHOP..... again

'Life is what happens to you while you're busy making other plans' (Allen Saunders).

My plan was to visit the local collectables shop (Jan.23) to find a pair of cheap wheels suitable for a plasticard project. I ended up choosing £19 worth of goodies, which the shop owner generously reduced to £14. 
The racing car just took my fancy, it cried out for restoration. It is a Dinky 1950s Cooper Bristol 233. Difficult to scale, I would suggest 1/38, although it is officially 1/43. Fair examples, in their original British racing green, can be picked up for about £12. The previous owner had repainted this toy in Italian red, I'm trying not to swear. Dinky actually did make a red Maserati as part of their range. 
(The photo below is from the excellent Vectis.co.uk website, no copyright infringement intended, no profit, and for purposes of education. It shows the two racing cars.)
               πŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽπŸŽ

WW2 GERMAN ARMY CART or LIMBER (JAN.24)

This was a fun project.  I wanted to use up the plasticard that was left over from the transport ship I recently made (see previous post). I was also keen to utilise a particular draught horse (one of those mentioned above). 
 
The German army used IF8 handcarts for supplying ammunition in the field, but these were also available with attachments for a single horse, and used as limbers for very light artillery. OK, the PAK38 had their own two horse limbers, but I will make do! I doubt this model cost £1 to make, and £2 for the horse.
MGB
πŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡ΊπŸ‡¦πŸ‡Ί
REPLYING TO FRIENDS COMMENTING BELOW

Thanks Donnie. I normally post every seven to ten days, so sometimes there is a few subjects I would like to record on the blog. It has been a fairly quiet week, partly because of the weather, so I decided to clear a few hobby projects. I just couldn't resist the racing car, and it is presently being paint stripped. To be honest, the German cart is rather large in scale, but it does look nice on the gaming table and I like the idea my PAK guns have some kind of limber.

Hello Roger. It really is a shame your postage costs are so ridiculous, I guess it is to discourage imports. The W. Britains 25pdr is so user friendly, and a wonderful model for wargaming WW2, or just shooting matchsticks. (Did you keep your father's gift?) I used the Airfix mountain troops in snow smocks, painting them as camouflage smocks. Have also camouflaged some Afrika Korps tunics too, which look fine for late war uniforms.
 
Roger, just tell your son his soldiers (and gun) have been conscripted, doesn't he know there is a war on?

Hello Brad. I am pleased with the limber horses, hope to base some more of them today. Thank you for the useful information on the Deetail Confederates. As it happens, in my spares box is, I think, the later advancing figure! I just need to repair the foot plugs. My plan is to recruit a combined battalion of Britains Deetail and Britains Swoppet figures. (Quite a few Southern NG units continued to wear grey uniforms and kepis after the ACW. ) I envy you having a genuine, firing Fischer!

Hello MJT. Had to smile with 'Cardclad'. Reminded me of the action at Jutland. The British won the battle but suffered heavier losses than the Germans. But the latter surveyed their ships and a secret report showed that one third or more of the British hits failed to detonate. Had they used the ammunition adopted shortly after Jutland, the Germans would have suffered heavier casualties than the British. This report, plus the RN could suffer heavier losses because of its sheer size, convinced the German Naval Command not to risk another major naval battle during WW1. That gunboat is so 'Christmas' in its appearance. And I love that you can see the naval crew firing the guns..... wonderful stuff. 

Hello Quinn. Best wishes to you and yours on your National Day of founding. As you probably know, most Brits are very pro our Australian cousins. You just brought back a memory of childhood I had totally forgotten..... my school chums and I, in about 1970, had toy revolvers that could be loaded with a handful of dried peas. You could buy bags of additional ammunition from the hardware shop for a few pence. Mine automatically reloaded when fired... about a dozen shots, if it did not jam. Thank you for that wonderful memory, lol.  
Quinn, have just found this photo of one, and I remembered it was called a Sekiden.

Hello John. I have met more than one wargamer that had only one moral code of conduct, to win by any means possible, and to condemn outright any set of rules that interfered with that result, lol. I just felt the Cooper Bristol in Italian red had to be corrected. A member of my family regularly visits Silverstone, and would expect no less. Today (27th), I primed the model, and black-washed the tires. It is already looking much nicer. Tomorrow I will mix up some Racing Green. 

Hello Henri. I had to look up your 'lego sticks and lightsabers'. Yes, they would certainly be easier to find! In my day, lego comprised a grey platform, red or white bricks, and blue roof tiles..... that was it! I suspect I will stick to well cut matchsticks, I can afford to lose them in the garden, lol. Regards.

Monday, 13 January 2025

TRANSPORT SHIP (and Frome Model Shop)

                                                    A COMPLETED TRANSPORT SHIP

On a recent visit to Somerset I picked up some plasticard. Have just completed a new ship for my collection. Rather than another gunboat, I wanted a vessel able to carry a battalion of infantry (12 figures). And for it to look like a vintage tinplate toy.


I must admit this project involved several rethinks. Inspired by two old tinplate toys, I've ended up with an amalgam of the two. But the paintwork took more time to sort out than the initial construction. I rejected a white model as it seemed to me to be too tropical, and some of my other models never looked great in white, and have been repainted. The second possibility included a fair amount of pink, but that didn't quite hit the mark either. Here are some more photos of the completed ship, serving with two others forming my 1848 Danish flotilla.

Construction and cost, £3
Inspiration No.1
Inspiration No.2
⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓

A VISIT TO FROME MODEL SHOP

During a recent visit to family in Somerset, I was taken to Frome Model Shop. This really is a superb store, packed with military kits. They also had some cabinets with figures and models fully painted and based. The whole experience reminded me of my childhood visits to the legendary Harrow Model Shop during the 1970s, where Stuart Asquith had a part-time job. Unfortunately, time required us to move on, but Chris was able to take a few photos. 

By the way, the shop has a reputation for being very competitive in their mail order pricing, and I have often picked up some bargains....... you know I like a bargain!
And a few more photos from Frome
St.John the Baptist Saxon Church, built 685AD, was replaced by another during 1250-1420AD. 
A Lovely Day Out!
MGB
⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪⛪
REPLYING TO COMMENTS FROM FRIENDS

Thanks MJT. Either I built a transport ship, or try to balance figures on the gunboats..... something had to be done, lol.

Hello Brad. I thought that link might prove of interest. I confess, looking at Freber's photo of original ships, I could easily become a collector. Well, I'm pleased my transport ship is sorted, and I'm looking forward to seeing the Danish flotilla in action.

Thank you, Roger. I do think it has the tinplate look, which is vital for the traditional toy soldiers. Yes, these shops are now rare in the UK, but those remaining do seem to still bring in the customers. Model railway collecting has always had a larger following than toy soldier collecting, although Warhammer and Games Workshop secured many of the younger generations. The problem now is computer games are an easier option, in money and space, and young minds are attracted to easy options, and what is fashionable. 

Yes, Tony, I do agree. This one more than most, it really did strike me, this is what a model shop was meant to look like...... could have enjoyed spending real money in there. Too many toy shops are devoted to cuddly toys, and then go bust when the supermarkets take their vital Christmas trade!

Hello Donnie. I have used the bulk of one sheet, costing £2.50 (from the Frome shop). Also used a pen tube, costing 50p. The rest is odd and broken bits in my spares box. I guess there is about 50p of glue and paint which I should have included. The remainder of the plastic sheet is enough to construct either an ammo cart, or a field kitchen c.1914. I have a pair of cart wheels in my spares box, and a draught horse which all need to be used. Yes, it is a very rare sight these days, unlike new barber shops. I should have taken some photos inside, they wouldn't have minded!

Thanks Mark. Plasticard works best for lower deck models, and this one went together quite easily, I even found a steel bolt which allowed me to join the three parts of the engine.... luckily. Yes, the shop deserves to be promoted, it was a magical stop off to briefly visit. Could have spent 30 minutes in there with ease, but a roast dinner was awaiting our return, lol.

Thank you, George. We were both looking forward to seeing you both. And view your new home, and also visit the town. But it really was a memorable day, and fascinating to boot. I'm so pleased we linked it with Yuletide. That shop really did bring back memories of Harrow, although yours must be unique!

Hello Quinn. I have viewed the new model with various armies, and I'm confident it will prove extremely useful. Just waiting for an opportunity to field the entire collection in a c.1900 naval action, with five gunboats and two supply ships per side. Likely linked to the Dominion campaign. Unlike yourself, my best hope is to find some very large space indoors to stage it, those matchsticks can fly!

Sunday, 5 January 2025

Nunney Castle in Somerset (and more)

While en route to see family in the county of Somerset, Chris and I stopped off at Nunney Castle (DEC 28). This small castle, more accurately a keep, was built shortly after 1375, when King Edward the IIIrd granted permission to a Sir John Delamare to reconstruct and fortify his manor house. This knight had served in France during the Hundred Years War. After several family changes, it passed to the Prater family, who remained Roman Catholic, and loyal to the House of Stuart during the English Civil War. It was during this conflict that the castle was besieged and captured by Parliamentary troops. The Praters returned with the Restoration. There were plans to hold French prisoners of war there during the French Revolutionary Wars, 1789-1802. But by 1910 it was in a very bad way, and part of a outer wall actually collapsed! By 1922 it was under the care of the government, and later English Heritage.

I must say, although a ruin, this castle still has a lot of mystique. Unfortunately, the moat bridge is considered unsafe so internal views are presently prohibited. Not sure close-up photos are that important, it is the landscape view which is memorable. This attraction (and carpark) is free to the general public to visit.

In the quaint village of Nunney is the All Saints Anglican Church, which was built in the 12th century. It replaced a Norman church, which had replaced one which was Saxon, from which some items have survived. Sir John Delamare is buried in the church.
πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘πŸ›‘

RECENT ACQUISITIONS
Popped into my local collectables shop on December 30. Wasn't really expecting to find anything so soon after Christmas...... I was wrong. Could not resist these American Civil War figures. I have still to find out who produced the metal Confederate officer, and would welcome opinions. While the four artillerymen are plastic Britains. The price was £5 for the mounted, and £15 for the four gun crew. Not cheap, but I wanted them!

These figures are always useful as they can stand in for Italian, French or Danish gunners. I will tidy up the boot paintwork, but otherwise leave them as they are. 
★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★

ANTIQUE TIN SHIPS
While researching ideas for my retro fleet of gunboats, I came across an auction house listing for a large collection of tin or base-metal ships. Not sure of their date but suspect they were made between 1870 to 1910, and very likely German. While my instinct is always to restore, I'm drawn to the simple but attractive paintwork, and muse at the games they participated in over a century ago. 
I'm seriously tempted to reproduce some of these for my wargames, using plasticard or wood.
(Photos For Educational Purposes only, no profit)
The naval crew have hanging tassels at the back of their hats, so probably German or Russian. I do like this toy, deserves to be reproduced.
Another of the same, so mass produced.
And again.
You often see weaponry like this, at first I thought they were guns, but they are probably early torpedo tubes!

Worth noting how many of the ships are designed to ram the enemy.
I'm assuming this is a Russian flag.
Could this be a Japanese flag? They do have the appearance of ships in the Russo-Japanese War of 1904-5.
Just imagine what these toys looked like when they were new!
MGB
⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓⚓
REPLYING TO COMMENTS FROM FRIENDS

Hello Donnie. I just love the archaic look of the tin gunboats. Have already decided to make a plasticard reproduction of number three, the troop carrier. I can see this being very useful in amphibious landings. The original carries ten, mine must carry a full battalion of twelve. It can then serve with at least five mid-19th century armies.

Hello Roger. It really is a nice castle to visit, probably even more so in the summer. I said to Chris, would have liked to have spent some time in the very attractive village, but we were en route to nearby Frome. Hope to make a second visit. The Confederate officer would pass as a Danish militia officer as some of their militia units wore grey in the mid-19th century, and the kepi was a popular headdress while on active service. I'm hoping to stage another 1848 Schleswig game soon.

WOW, Brad. I have viewed Gisbert Freber's site, which is devoted to Theodor Krause, Gotha tin and lead collectables. I noted the company made 1870s French and German infantry in 20mm, 45mm, and 60mm. The toys are pure magic. To see them is like stepping back in time. Concerning the troop carrier, I have decided to augment my reconstruction with some bolder artwork, and some internal detail. But it must remain appropriate for any nationality, and still claim its 'pedigree' or inspiration. (For purposes of education, some photos from Mr Freber's site, and a link.)